Generic Node SE Connectors
Below are details for the connectors on the Generic Node SE v1.1.
| connector / jumper on PCB | male/female | # pins | spacing | type |
|---|---|---|---|---|
| BOOT0 | male | 2 | 1.25 mm | pins for jumper |
| qwiic I2C connector | male | 4 | 1 mm | JST-SH |
| GPIO pin headers | female | 7 | 2.54 mm | low-profile (height 3.7 mm) ‘Dupont style’ |
| Battery connector | male | 2 | 2 mm | JST-PH |
| Battery connector on separate battery PCB |
male | 2 | 1.25 mm | Molex PicoBlade / ‘JST GH’ |
Battery PCB is connected to Generic Node PCB via PicoBlade female to JST-PH female cable.
Generic Node SE v1.1 PCB